Tip Top Guides

Whether you're looking at building your own rod or just wanting to replace a broken tip on your favourite rod. Robert A Conaghan carry the best quality guides in most materials and finishes. Below is a list of the range carried and sizes available in our extensive range.

Robert A Conaghan supply a very large range of rod building component's to many local fishing tackle stores so check our list of dealers throughout the North Island, South Island and the Pacific Islands to find out if your favourite local tackle store carries any of you parts required.

Fuji Tip Top Guides

Fuji Code

Description

Size Range

POT

A general use tip used for most types of rods. Non plated Stainless steel finish with an Aluminium Oxide insert.

2.0mm - 6.0mm tube I.D.

BPOT

A general use tip used for most types of rod. Black finish with an Aluminium Oxide insert.

1.6mm - 6.0mm tube I.D.

FST

Standard tip top guide for spinning and casting rods, e.g.. Softbait rods. Gunsmoke grey finish with a Silicone Carbide insert.

2.2mm - 4.0mm tube I.D.

BUXOT

Heavy gauge framed tip for bottom fishing and trolling rods, up to 50lbs line class. Black finish with an Aluminium Oxide insert.

2.8mm - 7.0mm tube I.D.

HGST

Heavy gauge framed tip for jigging, bottom fishing, and trolling rod. Sloped frame non bind on tip top. Gunsmoke finish with Silicone Carbide insert.

4.0mm - 7.0mm tube I.D.

PMGST

Sloped frame non bind on tip top. Used for spinning and casting rods, great for rods where braid is used. Polished Stainless Steel finish with a Silicone Carbide insert,

2.0mm - 5.5mm tube I.D.

MGST

Sloped frame non bind on tip top. Used for spinning and casting rods, great for rods where braid is used. Gunsmoke finish with a Silicone Carbide insert

2.4mm - 5.5mm tube I.D.

MNAT

Super ocean tip top guide, with a deep pressed frame and a bind on foot to ensure tip stays in place under extreme pressure. Used for spinning, casting and mechanical jigging rods. Non Plated Stainless Steel finish with an Alconite insert.

2.8mm - 3.0mm tube I.D

BMNAT

Super ocean tip top guide, with a deep pressed frame and a bind on foot to ensure tip stays in place under extreme pressure. Used for spinning, casting and mechanical jigging rods. Black finish with an Alconite insert.

2.4mm - 4.0mm tube I.D.

MNST

Super ocean tip top guide, with a deep pressed frame and a bind on foot to ensure tip stays in place under extreme pressure. Used for spinning, casting and mechanical jigging rods. Gunsmoke finish with a Silicone Carbide insert.

1.8mm - 5.0mm tube I.D.

T-FCTT

Equipped with a Torzite insert this ultra small tip top guide is perfect for micro jigging rods for bait casting rods, Titanium finish with Fuji's new Torzite insert.

1.6mm - 2.6mm tube I.D.

T-LGTT

Equipped with a Torzite insert this ultra small tip top guide is perfect for micro jigging spinning rods. Titanium Finish with Fuji's new Torzite insert.

1.6mm - 2.6mm tube I.D.

Non Branded Tip Top Guides

Code Description Size Range

FRPT Stainless Steel Pear tip for Fly Rods. Used for most fly rods. 1.6mm - 2.6mm tube I.D.

PT Generic Stainless steel boat rod tip top with no ceramic inserts. 2.5mm - 7.0mm tube I.D.

RTA Stainless steel Boat rod roller tip for heavier Boat rods with roller tips. 4.0mm - 9.0mm tube I.D.